orb® Latex Powdered Surgical Gloves


The orb® Latex Powdered Surgical Gloves are specially developed dipping process guarantees the production of a surgical glove with a high resistance to tearing and a reliable impermeability.
The micro-rough surface ensures excellent sensitivity, a safe grip and good control over surgical instruments, even when wet.
In response to the latest research findings, potentially irritating substances are removed from the gloves by a multiple washing process.

Catalogue

Functional Benefits

Extra strength provides additional protection from surgical debris.

Fully anatomical design to reduce hand fatigue.

Softness provides superior comfort and natural fit.

Micro-roughened surface provides excellent wet and dry grip.

Easy donning and helps prevent rolling back.

High strength and elasticity.

Quality Standards

Conforms to ASTM D3577 and EN 455 Standards

Manufactured under QSR (GMP), ISO 9001:2008 & ISO 13485:2003 (Medical Device) Quality Management System

terilized by Gamma Ray / EtO

Bioburden and sterility tested

Glove Size & Packaging

Available sizes 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0

Packaging Each pack contains 100 gloves



Type Gamma Ray / EtO Sterilized; Powdered
Material Natural high quality rubber latex
Design & Features Hand specific; curved fingers; beaded cuff; natural; textured surface; USP grade absorbable cornstarch
Powder Absorbable cornstarch USP Grade
Storage The gloves shall maintain their properties when stored in a dry condition at temperature not higher than 30°C
Moisture Content Below 0.8% per glove
Shelf-life 5 years from the date of manufacturing
Dimension orb® Glove ASTM D3578 EN 455
Length(mm) Min. 280 Min. 245 (Size 5.5)
Min. 265 (Size 6-9)
Min. 250 (Size 5-5.5)
Min. 260 (Size 6-6.5)
Min. 270 (Size 7-8)
Min. 280 (Size 8.5-9.5)
Width(mm), 5.5 71 ∓ 6 70 ∓ 10 72 ∓ 4
Width(mm), 6.0 77 ∓ 5 76∓ 6 77 ∓ 5
Width(mm), 6.5 83 ∓ 5 83 ∓ 6 83 ∓ 5
Width(mm), 7 89 ∓ 5 89 ∓ 6 89 ∓ 5
Width(mm), 7.5 95 ∓ 5 95 ∓ 6 95 ∓ 5
Width(mm), 8 102 ∓ 5 102 ∓ 6 102 ∓ 6
Width(mm), 8.5 108 ∓ 5 108 ∓ 6 108 ∓ 6
Width(mm), 9 115 ∓ 5 114 ∓ 6 114 ∓ 6
Thickness - Single Wall(mm), Fingers Min. 0.10 Min. 0.10 N/A
Thickness - Single Wall(mm), Palm Min. 0.10 Min. 0.10 N/A
Thickness - Single Wall(mm), Cuff Min. 0.10 Min. 0.10 N/A
Property ASTM D3577 EN 455
Elongation at Break (%): Before Aging Min. 750 N/A
Elongation at Break (%): After Aging Min. 560 N/A
Tensile Strength(MPa): Before Aging Min. 24 N/A
Tensile Strength(MPa): After Aging Min. 18 N/A
Force at Break (N): Before Aging N/A Median 9
Force at Break (N): After Aging N/A Median 9